<< Click to Display Table of Contents >> Navigation:  Physical models used > PV Module - Standard one-diode-model > Low-light measurements and studies > Table of low-light measured points in Excel

Defining the low-light data within the PVsyst dialog may be tedious.

PVsyst allows to define a table in EXCEL, and import it  into the low-light tool by copy/paste.

The table should have the following characteristics:

The top left cell should contain the text  "Low-light data".

The second line contains the column titles, which should  be the same texts as shown here, but in any order.

NB: Only GRef, TRef and  Pmp are mandatory. If Voc is present it will allow the linearization.

Blank lines are ignored.

You can define a table of the full 23 values of the IEC 81853 norm.